Download this Resource and Take It With You

At DRP, we believe that knowledge is speed!  That’s why we want to make sure you have access to valuable information like this in addition to our innovative performance products.  Download Suspension Analysis Products PDF and take this important resource with you!
 
 

Dynamic Scaling Systems

DSS-3 Portable Dynamic Scaling System

Take your set-up equipment to the next level. DRP Dynamic Scaling Systems (Pull Down Fixtures) allow the user to motion the racecar under full load and measure wheel weights, cross %, camber, caster, bump, rear steer and more, just like the car was on the track! We have simplified this technology for almost any level of race team. Simple toggle switch controls motion the vehicle with our fully electric cylinders. Read wheel weights and percentages on the scale display. Read wheel position using our laser based wheel fixtures. Completely portable, use in your shop or at the track!

Accurate • Quick • Simple to Use

  • Available with built in 4500# Dual Load Cells or for use with Your Existing Scales
  • Motion Front & Rear with Simple Toggle Switch Controls
  • 12” Tall Billet Aluminum Stands
  • Heavy Duty 6000# Leveling Feet
  • 12VDC Cylinders with Power Supply & Control Panel
  • Innovative Removable Roll Offs for Zeroing Scales
  • Use as an Elevated Set-Up Platform for Weekly Set-Ups
  • Full Slip Plates Eliminate Wheel Bind
  • Test Set-Up Ideas before getting to the Track
  • Test & Set Bump Stops & Coil Bind
  • Check for Suspension Bind
  • Set-up & Use in 30 minutes!
  • Rate Sway Bars & Springs
  • Works on Any Surface – Innovative Design does not apply additional load to floor!
  • Adapts to any chassis style
  • Includes DSS Analysis Software
  • Includes User Training (Travel not Included)
  • Ships Truck Freight

Add our RS400PRO Kit and instantly measure:
Bump Steer, Rear Steer, Camber Change, Caster Change, Tread Width Change & More as you motion your car.

Item Number Description Price
PD20200E DSS-300EL DYNAMIC WHEEL LOAD FIXTURE WITH INTEGRATED DUAL LOAD CELLS/ 4500LB CAPACITY SCALES (Per wheel); BILLET ALUMINUM SCALE STANDS WITH LEVELING FEET; TRIPLE ELECTRIC PULL DOWN CYLINDERS; ROLLING TOOL BOX FOR SYSTEM STORAGE WITH INTEGRATED CONTROL PANEL AND SCALE DISPLAYSystem Includes:
•(4) 12” Billet Aluminum Scale Boxes with Integrated 4500# Capacity Dual Load Cells •(4) Teflon® Slip Plates (One for each wheel)
•(4) Detachable Roll Off Platforms •(1) Tool Cart with Integrated Control Box, Power Supply and Scale Display
•(3) Electric Pull/Push Cylinders; 6” Stroke (•1) DSS Analysis Software (1) Instruction Manual
•(2) 2” x 3” Steel Pull Down Beams •Complete Training (Travel Not Included)
•(3) Pull Cylinder Beam Mounts
•(3) Pull Cylinder Chassis Mounts; Adjustable Height
$15,995.00
PD20300E DSS-300E DYNAMIC WHEEL LOAD FIXTURE WITHOUT LOAD CELLS; BILLET ALUMINUM WITH LEVELING FEET; TRIPLE ELECTRIC PULL DOWN CYLINDERS; ROLLING TOOL BOX FOR SYSTEM STORAGE WITH INTEGRATED CONTROL PANEL AND SCALE DISPLAY STORAGE; CUSTOMER SUPPLIES SCALES; SPECIFY 2.5” or 4” SCALE PADSSystem Includes:
•(4) 12” Billet Aluminum Scale Boxes with Place for Your Scales •(4) Teflon® Slip Plates (One for each wheel)
•(4) Detachable Roll Off Platforms •(1) Tool Cart with Integrated Control Box & Power Supply
•(3) Electric Pull/Push Cylinders; 6” Stroke (•1) DSS Analysis Software (1) Instruction Manual
•(2) 2” x 3” Steel Pull Down Beams •Complete Training (Travel Not Included)
•(3) Pull Cylinder Beam Mounts
•(3) Pull Cylinder Chassis Mounts; Adjustable Height
$11,895.00
PD20500 STRAIGHT RAIL INSTALLATION KIT FOR PD20200E/PD20300E; INCLUDES: (2) CROSS BARS WITH BRACKETS & CENTER RAIL $1,295.00

Wheel Measurement Systems

RS400PRO Wheel Measurement System

Save time and increase accuracy with precision DRP wheel fixtures and wheel measurement systems. Measure individual wheel locations, referenced to the chassis, in minutes without tape measures or strings. Instantly measure rear end location, front and rear toe, camber and more. Use for weekly static set-ups and dynamically with our DSS-3 systems. Make a change and see it immediately. Our customers love the time savings from using this system. As on all DRP products, your satisfaction is guaranteed!

  • Save Time & Improve Accuracy
  • 5 Year Warranty on Fixtures
  • 2 Year Warranty on Electronics
  • Single Person Operation
  • Read All Four Wheel Locations Instantly
  • Works on any shop floor, surface plate, set-up platform or suspension rig.
  • Entire system mounts to the chassis
  • Customise for almost any application

The RS400PRO sets the Standard for all Motorsports Wheel Alignment Systems. Quickly and Accurately Measure:

  • Four Wheel Toe
  • Four Wheel Camber
  • Caster
  • Bump Steer
  • Ackermann
  • Wheel Base
  • Rear End Location
  • Axle Tube Camber/Toe
  • Rear Steer
  • Hook-Up Points
  • Body Location
  • Square Lower Control Arms
RS400PRO System Includes:
4 Adjustable Wheel
Measurement Fixtures
4 Hub or Spindle Mount Axle Alignment Fixtures
2 Magnetic or Clamp-on Frame Squares
1 Dual Laser Stand with Chassis Mount Kit
4 Adjustable Shaft Locks for Axle Alignment Fixtures
1 Caster/Camber Gauge Adapter
2 Wall Mount Storage Racks
1 Tool Kit
1 Wheel Locator™ CD
1 Instruction Manual

 

Item Number Description Price
90400P Real Square RS400PRO Four Wheel/Dual Laser Professional Wheel Measurement System $3295.00
90200P Real Square RS200PRO Dual Wheel/Dual Laser Professional Alignment System $2695.00
RS200PRO Includes only (2) Wheel Measurement Fixtures & (2) Axle Alignment Fixtures Specify hub adapters and frame squares. See page 10 for options.
98130A Centerline Laser Option $499.00
96375 Offset Late Model Installation Kit (Port City, Lefthander, Hamke, Others) $89.00
96380 Asphalt Modified Installation Kit (Troyer, Spafco, Chassis Dynamics, Others) $230.00
96390 Dirt Late Model Installation Kit (Barry Wright, Mastersbuilt, Rocket, Others) $230.00

Data Acquisition Systems

Aim EVO-4 Data Systems

Accurate suspension analysis requires accurate wheel travel data. Our Aim EVO-4 systems are custom set-up for your application. Simple instructions and in house tech support available. Affordable, accurate & easy to use.

  • 5 Channels – Expandable up to 25+
  • Simple Wiring System
  • Lightweight and Compact
  • 1.75” Clamp-on Chassis Mount
  • 2 Speed Channels
  • GPS Based – No Beacons
  • 9-15v Power

DA21500 Kit Records:

  • RPM
  • G-Loads
  • Track Map (Drivers Line)
  • All Four Shock Travels with Velocity
  • Steering Position
  • Lap Times wit Segment Times
  • Add Throttle Position, Brake Pressures, Tire Temps, Oil Temp, Oil Pressure, Water Temp & More!
Item Number Description Price
DA21500 AIM EVO-4 Data Aq System; 4 Shock/1 Steering/RPM/G Meter/Track Map; with Installation Kit, Instructions & Case $3495.00
DA21550 4 Channel Expansion for AIM Data Aq System with Cable (Required for Additional Sensors) $299.00
DA21600 Replacement Linear Potentiometer (For Shocks/Steering) with Cables $319.00
DA21650 Throttle Position String Potentiometer with Cables $299.00
DA21670 Brake Sensor Kit; 1 2000psi Sensor/Extension Cable/Whip Line, Bleeder and Fittings (One wheel kit) $219.00

Aim SOLO In Car Lap Timer with Track Map

You’ll be amazed at the functionality of this simple unit. Displays lap times for the driver using GPS technology, so no beacons are necessary. Once your finished the run, download the data into your computer and view track maps showing each laps line along with g loads, segment times, acceleration speed, predictive lap times and more. Includes lap timer & software. Mounting bracket sold separately.

  • No Wiring – Internal Battery & GPS Antennae
  • Rechargeable Battery or Hard Wire
  • Compact
  • 1.75” Clamp-on Chassis Mount (Available Separately)
  • Magnetic Attachment for Quick Removal
  • GPS Based – No Beacons
  • Easy to Use

DA22000 SOLO Features:

  • Displays Lap Times
  • Predictive Lap Times
  • Best Time
  • Records Track Map
  • G-Loads
  • Lap Times wit Segment Times
  • Acceleration & Braking Speeds & More!
Item Number Description Price
DA22000 Aim SOLO GPS Lap Timer with Track Mapping $399.95
DA22100 SOLO Chassis Mount; 1.75” Round Tube; Clamp-On $69.95